S.Module 563

The S.Module 563 is a complete high performance signal processing system with Freescale's DSP56311.
The DSP56311 is a 24 bit fixed-point processor with a peak performance up to 150 MIPS at 150 MHz. The on-chip enhanced filter coprocessor (EFCOP) processes filter algorithms in parallel with core operations and can increase the performance up to 255 MIPS during parallel work.

The large on-chip RAM of 128k words is sufficient for the most of applications. 512k x 8 bit on-board Flash Memory can be used for non-volatile storage of boot loader program, custom programs, parameters, look-up tables and data. A 128k x 24 bit on-board RAM extensions is available as an optional extra.
The host interface and peripherals of the DSP56311 are available on connectors. All inputs are 5 V tolerant. The serial interface (SCI) of the DSP is equipped with RS232 line drivers to use the port for standard asynchronous communication, e. g. for communication with a PC.
The S.Module 563 comes with compatible mechanic and pinout to the D.Module processor board series, easy to expanded with different existing peripheral devices for data acquisition/data output and easy to integrate in custom designs.

Freescale DSP56311 24 bit Fixed-Point DSP

single-clock-cycle-per-instruction engine
150 MHz, peak performance 150 MIPS
1,8 V core voltage, 3,3 V I/O
on-chip filter coprozessor (EFCOP) running concurrently with the core and can increase the overall performance up to 255 MIPS
object code compatible with the DSP56000 core
128k x 24bit on-chip RAM
on-chip instruction cache controler
6 channel DMA
on-chip PLL

1 x host bus
1 x asynchronous serial interface (SCI)
2 x synchronous serial interface (ESSI)
3 x timer

On-board Memory Extension

512k x 8bit Flash Memory
128k x 24bit SRAM (optional)

UART

uses the SCI
RS232 line drivers
RTS/CTS handshake lines (SCLK line of SCI / TIO2 are used)

On-board Watchdog and Supervisory ICs
4 x Interrupt Lines
External Bus Interface

5V tolerant
24 data and 18 address lines, chip select line, read and write line
miniBus

Hardware Debugging Support

JTAG test access port (TAP)
OnCE module

Power Supply
- 3.3 V ... 5 V
- all other voltages are generated on board and are controlled by supervisory ICs
On-board BIOS - supports the otware development and programming of
- UART and Communication
- Flash Memory
- initial configuration of S.Module 563
Set-up Utility - supports
- upload of programs and parameters into the Flash Speicher
- read from memory
- write to memory
- program execution

SEMATEC System Engineering & Marine Technology GmbH

Gewerbeallee 12, D-18107 Elmenhorst / GERMANY
Phone: +49 (0)381 / 54 847 - 0, Fax: +49 (0)381 / 54 847 - 70